The SAE10A is a 10
spindle variable angle mitering machine. It has 2 diamond and 2 resin and 2
polishing spindles on a 0～45° mitering base and 4 spindles for the front and
rear arris. Polishing wheels are lifted pneumatically for a trouble free, high
quality finish. Positioning of the spindles can be controlled automatically or
manually. Spindle position, conveyor pad position, and conveyor speed are
controlled by a PLC and setting and display of glass thickness, conveyor speed,
miter angle and flat edge width are by touch screen. The precision cast alloy
conveyor with enclosed bearings ensures smooth operation and high load capacity.
Inlet and outlet conveyor use timing belts for long life and precise operation.
Conveyor speed is controlled by a variable frequency inverter drive for low
maintenance and quick speed adjustment. The inlet conveyor height is adjustable
to quickly change the amount of glass removed during flat polishing.
PLC controlled system with automatic and manual operation mode. A Man-Machine Monitor is for setting and controlling and displaying the processed glass parameter.
Precision casting alloy conveyor pad make the transmission of conveyor smoothly and improve the precision of transmission and load-bearing capacity of the conveyor. The conveyor pads adopt new rubber material and it does not dirty the glass. Adopt timing belt for the input and output conveyor, improve the precision of transmission. Equipped with a mechanical step-less reducer for adjusting the glass feeding speed, easy and quickly adjusting, meet the demanding of different size and thickness glass.
High precision grinding
ABB motor improve the glass grinding precision and reduce the grinding noise. Input and output timing belt conveyor improve the transmission precision.
speed is controlled by a variable frequency inverter drive for low
maintenance and quick speed adjustment.
It has 2
diamond and 2 resin and 2 polishing spindles on a 0～45° mitering base.